Ferritin Quantitative Test

Dengue NS1 Antigen Rapid Test

The Dengue NS1 Antigen Rapid Test is a lateral flow immunoassay for the qualitative detection of Dengue virus NS1 antigen in human serum, plasma or whole blood. It is intended to be used by professionals as a screening test and provides a preliminary test result to aid in the diagnosis of infection with the dengue virus. For professional in vitro diagnostic use only.
Product Detail
Introduction
Dengue virus belongs to a serotype subgroup in the family flaviridae, mainly transmitted through vectorial insects such as Aedes aegypti and Aedes alboptus, causing dengue fever and dengue shock syndrome with high morbidity and mortality.
The Dengue NS1 Antigen Rapid Test is a rapid lateral flow immunoassay for the qualitative detection of Dengue virus NS1 antigen and can give a result in 15 minutes by minimally skilled personnel without any laboratory equipment.

Product Features
Product Name:Dengue NS1 Antigen Rapid Test
Sample Type:Serum, plasma or whole blood
Loading Volume:10ul
Reaction Time:15 mins
Shelf Life:24 months
Storage:36-96°F (2-40℃) 

Test Procedure 
The test should be operated at room temperature 59-96°F (15-40℃). 
1. Balance the test cassette, specimen and buffer to reach room temperature before testing. 
2. Remove the test cassette from the foil pouch and use it as soon as possible. 
3. Place the test cassette on a flat and clean surface. Transfer the specimen by a pipette or a dropper: 
To use a Pipette: 
4. Transfer 10μL of Serum, Plasma, or Whole blood specimen into the Sample Well (S) of the test cassette, then add 2 drops of sample buffer into the Buffer Well (B) and start the timer. Avoid air bubbles in the Sample and Buffer well. See illustration below. 
To use Dropper: 
5. Hold the dropper vertically and fill the capillary part of the dropper (not exceed the capillary part )with Serum, Plasma or Whole blood specimen (10μL), then carefully dispense the specimen into the Sample Well (S) of the test cassette, then add 2 drops of sample buffer into the Buffer Well (B) and start the timer. Avoid air bubbles in the Sample and Buffer well. 
6. Wait for the colored line(s) to appear and read the results at 15 minutes. Do not interpret the result after 20 minutes. If positive signal appears after 20 minutes, it should not be reported as positive.
Leave A Message

Please provide us with the information below, and we'll contact you as soon as possible.

Related Products
Dengue Ag&Ab Combo  Rapid Test
Dengue Ag&Ab Combo Rapid Test
The Dengue Ag&Ab Combo Rapid Test is a rapid membrane based chromatographic immunoassay for for the qualitative detection of NS1 antigen and IgM/IgG antibodies to all four serotypes (DEN-1, DEN-2, DEN-3 and DEN-4) of Dengue virus in human serum, plasma or whole blood. It is intended to be used by professionals as a screening test and provides a preliminary test result to aid in the diagnosis of primary and secondary Dengue infection. For professional in vitro diagnostic use only.
Dengue IgG/IgM Rapid Test
Dengue IgG/IgM Rapid Test
The Dengue IgG/IgM Rapid Test is a rapid membrane based chromatographic immunoassay for qualitative and differential detection of IgG and IgM antibodies to all four serotypes (DEN-1, DEN-2, DEN- 3 and DEN-4) of Dengue virus in human serum, plasma or whole blood. It is intended to be used by professionals as a screening test and provides a preliminary test result to aid in the diagnosis of primary and secondary Dengue infection. For professional in vitro diagnostic use only.
Biotime ST2 Rapid Quantitative Test
ST2 Rapid Quantitative Test
ST2 is a member of the interleukin-1 receptor family biomarker and circulating soluble ST2 concentrations are believed to reflect cardiovascular stress and fibrosis. The studies have demonstrated soluble ST2 to be a strong predictor of cardiovascular outcomes in both chronic and acute heart failure. It is a new biomarker that meets all required criteria for a useful biomarker.
Incubation Chamber
ICE-100E Incubation Chamber
The incubation chamber is an auxiliary device for Biotime’s fluorescence immunoassay analyzer. The reaction temperature and time is critical for test results. The incubation chamber provides an optimized environment as well as automatic timers for test reactions to improve the reliability of test results.
biotime tPSA Rapid Quantitative Test
tPSA Rapid Quantitative Test
Prostate-specific antigen, or PSA, is a protein produced by normal, as well as malignant, cells of the prostate gland. The PSA test measures the level of PSA in a man's blood.
TSH/FT3/FT4 Rapid Quantitative Test (Fluorescence Immunoassay)
TSH/FT3/FT4 Rapid Quantitative Test (Fluorescence Immunoassay)
The BiotimeTSH/FT3/FT4Rapid Quantitative Test is intended to quantitatively detect the concentration of thyroid-stimulating hormone (TSH), free triiodothyronine (FT3), and free thyroxine (FT4) in human serum and plasma samples on the Biotime FIA Analyzer by fluorescent immunoassay. The test is used as an adjunctive diagnosis of thyroid function. For in vitro diagnostic use only. For professional use only.
Biotime TES rapid fluorescence immunoassay test
TES Rapid Quantitative Test
Testosterone is the primary male sex hormone and an anabolic steroid. In male humans, testosterone plays a key role in the development of male reproductive tissues such as the testes and prostate, as well as promoting secondary sexual characteristics such as increased muscle and bone mass, and the growth of body hair.
 Monkeypox Virus ( Real-time PCR ) test kit
Detection Kit for Monkeypox Virus ( Real-time PCR )
Detection Kit for Monkeypox Virus ( Real-time PCR ) is designed for the qualitative detection of Monkeypox Virus (MPV) DNA extracted from skin, fluid, or crusts collected directly from skin lesions. It's based on real-time PCR technology, the primers and probes target specific sequences of MPV, and do not react with nucleic acids of other pathogens.
Leave A Message

Leave A Message

    Please provide us with the information below, and we'll contact you as soon as possible.

Home

products

about

contact